SYSTEM SETUP
1.
Assemble the Dual Lumen Breathing Circuit.
2.
Switch on the power at the back of the control unit and plug in the
AC power cable to the control unit if necessary.
Note: During each startup the control unit self-calibrates.
3.
The screen will display the last therapy completed. You may
have different therapy options as pre-programmed therapies
in the drop-down list under Auto.
4.
Position the control unit on a firm, flat surface within arm’s
length of the patient. The control unit should be placed below
elbow level for the best visibility of the screen.
Note: Make sure that the air inlet areas on the left and right
of the control unit are not blocked. Air must flow freely around
the control unit.
5 A Patient Guide to BiWaze
®
Clear System
Prepare for Therapy
