ABM International, Inc. Series: 1018/1022/1026/1032 V1.0
Model: Innova Longarm Quilting Machine Sequin
Proprietary information of ABM INTERNATIONAL, Inc. furnished for customer use only.
No other uses are authorized without the prior written permission of
ABM INTERNATIONAL, INC.
17
4.0 Sequin Operation
The Sequin system was designed to give owners the ability to create aesthetically pleasing sewn products. The
system allows the operator to sew sequins on to the product in three different modes – single, continuous and
overlapping.
When the Sequin system is connected and activated on the touchscreen, the machine will apply sequins to the
product whenever the machine is sewing and the white button of the Innova is pressed. The quantity of sequins
applied is based upon the mode selected and the size of the sequin entered.
4.1 Getting the Innova ready to apply Sequins
Once the Sequin attachment has been mechanically connected to the machine, the lightning stitch control system
must be configured to operate it.
Step 1: Check to make sure the Sequin attachment is securely attached to the Innova and that the sequins are
centered on the needle.
Step 2: Make sure the two Sequin motor cables are connected to the Innova.
Step 3: Plug the Innova into an electrical outlet and turn ON the main switch.
Step 4: Allow the lightning stitch to boot up completely.
Step 5: At the MAIN screen, touch the SETUP button.
Step 6: If the Sequin attachment is properly connected, a button labeled SEQUIN will appear on the SETUP screen.
