第8页
Attention
：
1. The device can only be charged with the factory-configured charger, do not use any other
chargers.
2. To ensure safety and extend the service life of the battery, please do not charge the battery at a
temperature below 0℃ or above 40℃.
3. If the battery is placed in a high or low temperature environment, such as in a closed car in
summer or winter, it will reduce the battery capacity and shorten the battery life.
4. A new battery can only perform at its maximum capacity after two to three complete
charge/discharge cycles.
5. The first use or every 2 to 3 months, the need for battery maintenance to improve the use of
efficiency. Normally, avoid overcharging and discharging. During charging, be sure to maintain
a good ventilation and heat dissipation environment.
4
Common Fault Analysis & Solutions
No. Fault
Analysis
Solution
1
Fail to turn on the
machine
Check if the battery is fully
charged
Replace the battery, or connect
to the direct power supply.
2
Fail to record
If the light next to the video
button is not lit, but there is a
card inserted, maybe the VCR
does not read the SD card
Replace the SD card
If the light next to the video
button is on, there is a card
inserted, start recording does not
flash, maybe the SD card is full
or SD card error
Replace the SD card
3
Screen Messup/
Screen Blackout
Low battery
Replace the battery, or connect to
the direct power supply.
