background image

 

 

Chapter 1.  Important Safety Instruction   

 

  Do not open the case, as there are no serviceable parts inside.    Your 

warranty will be void. 

 

  Do not try to repair the unit yourself, contact your local supplier or your 

warranty will be void. 

 

  SAVE THESE INSTRUCTIONS--This manual contains important instruction 

that should be followed while installation and operation. 

 

  Make sure that the AC Utility outlet is correctly grounded to avoid any 

possibility of unpredictable voltage leakage. 

 

  Make sure the input voltage is within the windows stated in the specs sheet 

and the load connected is within the rated capacity. 

 

  Should a strange noise, or smell occur, please turn off the unit and consult 

your local distributor for repair immediately. 

 

  The equipment shall be operated under the maximum ambient temperature of 

40°C. 

 

  Do not defeat the safety purpose of the polarized or grounding-type plug, A 

polarized plug has two blades with one wider than the other. A grounding type 
plug has two blades and a third grounding prong. The wide blade or the third 
prong are provided for your safety. If the provided plug does not fit into your 
outlet, consult an electrician for replacement of the obsolete outlet. 

 

  The equipment shall be installed near the wall socket outlet and that the 

disconnect device (plug on power cord and appliance coupler) shall be readily 
accessible. 

 

  Caution: Risk of electric shock! Unit supplied by more than one power source, 

disconnection all the power supply connection (plug) is required to de-
energized this unit before servicing. 

 
 
 
 
 
 
 

 

  An overcurrent protective device and short-circuit protection device with 

adequate breaking (rupturing) capacity to interrupt the maximum fault current 
shall be incorporated external to the equipment between the equipment and the 
building installation 

 
 

 

 

 

Model  

Breaking 
capacity of 
overcurrent 
protective 
device 

Model   

Breaking capacity of 
overcurrent protective 
device 

RacPDU-115A 20A 

RacPDU-210D  20A 

(cTUVus)or 

16A(CB) 

RacPDU-120B 20A 

RacPDU-216G 20A 

(cTUVus)or 

16A(CB)  

RacPDU-130H

30A 

 

 

Summary of Contents for RacPDU-115A









Reviews: