17
17
Operating Instructions
6.9.
Operating Pilot Pro using a Switch
or
the
command words “Next” and “Do it”.
(Also see Section 6.6 regarding Switch/Scan usage and set-up.)
Single-Switch Mode
After switching on, Pilot Pro scans through the menu.
When your Pro speaks the desired command, confirm it with:
1. The “OK“-key (r) on your Pilot Pro.
2. Your Switch.
3. The default Pilot Pro command word “Do it“.
Pilot Pro carries out your command and resumes scanning through the menu. After
having done this for a predetermined number of repetitions the Pro stops at the first
menu item. Restart the procedure as described in 1. or 2.
Operation with the command words “Next“ and “Do it“
Operating your Pilot Pro with the command words “Next“ and “Do it“ is always available
without any re-programming or re-setting.
1. Say the command word “Next” to move to the next word in your menu tree.
(With Prompt ON you will hear the words spoken to you.)
2. To get to the next menu item repeat this until you have reached the desired
item.
3. Say “Do It” to execute this command.
