User manual Version 1.3
ABLELink
®
Ethernet Serial Server SE5002
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
-
31
-
On the right of the panel is a sample
for COM 4 settings
. On the left is the list of the COM ports that have
been selected (on
Select Ports
window) for use by the
Virtual COM
Redirector. Change the list by clicking
the
Select Ports
button.
Each COM port has its own settings. When click on a COM port, the Control Panel changes to reflect that
the selected port.
Note:
COM port changes become effective immediately.
4.3 Configuring Virtual COM Ports
Serial/IP COM port can be changed as follows:(Fig. 39)
1. Select a COM port on the list.
2. On
IP Address of Server
, enter the serial serve IP address.
3. On
Port Number
, enter the TCP port number of the serial server.
4. On
Server Credentials
, the default is
No Login Required
. If the serial server does require login by the
Virtual COM Redirector, the Virtual COM Redirector must provide a username and/or password every time
an application tries to access the serial server.
5. Click the
Configuration Wizard
button and then click the
Start
button that shall appear on the wizard
window. This step verifies that the Virtual COM Redirector communicates with the serial server. If
Log
display does not show errors, click
Use Settings
, return to the
C
ontrol Panel (Fig. 39)
Fig. 39. Configuration Wizard
6. Settings on the
Connection Protocol
must match the TCP/IP protocol supported by the serial server. The
Configuration Wizard is capable of determining the correct settings.
7. On
COM Port Options
, the settings must match the COM port behavior expected by the PC
application. The Configuration Wizard will recommend such settings.
