background image

 

 

190924_REV.2 

II.  Condition of use 

 
Applications 
Cultistir is a spinning system comprising for stirring units for the gentle cultivation of 
cells and the preparation of cell products in bioreactor. Cultistir is suitable for use with 
cell suspension and cell aggregate formation (e.g. organoids or embryoid body of stem 
cell) and immobilized adherent cells (e.g. micro carriers).   
 
Product combinations 
Cultistir  is  designed  for  using  with  ABLE  single-use  bioreactor  of  5mL  (Product  No. 
BWV-S005A), 30mL (Product No. BWV-S03A), 100mL (Product No. BWV-S10A).   
 

Cultistir  is  not  designed  for  using  of  any  other  culture  vessel  or  bioreactor, 
spinner flask. 

 
Application not for the intended use 
Cultistir is explicitly NOT intended for the applications: 
 

Stirring of flammable or corrosive liquids 
At danger atmosphere of explosion 
Stirring of volatile liquid in a closed vessel 

 
Dangers involved when safety precautions are not observed 
Cultistir is safe to use. Some danger may exist if the instruments are used by untrained 
personnel.  Any  person  given  the  task  of  operating  Cultistir  must  first  read  the 
operating and safety instructions and understand them fully or be thoroughly trained 
by a superior in the use of the instruments before operating the instrument. 
 
Safety at work 
Independent of any safety precautions listed here, all other relevant safety aspects (e.g.   
regulations of each country or authority, rules of a company) must be observed. 
 
Safety aspects for the user company 
The supervisors of operating personnel must have read and understood all the safety 
precautions involved and must ensure that these are adhered to. They must also ensure 
that  operating  personnel  also  understand  and  observe  all  safety  rules.  Prior  to 

Summary of Contents for Cultisir





















Reviews: