15
190924_REV.2
3. Starting (for 100mL)
①
Place the attachment ring on small pins on Base pate surface (3 posion that are not
adjacent).
②
Switch the power switch to ON position.
③
Stirring speed is displayed on the display. Set the stirring speed with the
△
/up and
▽
/down keys. During the setting, speed indicator on the display panel blinks.
④
Place the 100mL bioreactor on set pins (3 position) of base plate.
⑤
Press the stirring (blue) button, a blip sounds, and the rotation starts.
⑥
Stirring speed can be changed during operation.
4. Stopping
①
Press the stirring (blue) button, the rotation stops.
②
If you do not operate for more than a month, Cultistir device must be taken out
from the incubator. Turn off the power to remove the device from the incubator.
DO NOT leave unpowered Cultistir device in the incubator for more than a
month.
Attachment ring
