Reading Office
Cutbush Park, Danehill, Lower Earley,
Reading, Berkshire. RG6 4UT. UK.
Tel: +44 (0)118 9311188
Email: [email protected]
Aberdeen Office
Unit 6 Airside Business Park, Kirkhill Industrial Estate,
Dyce, Aberdeen. AB21 0GT. UK.
Tel: +44 (0)1224 725999
Email: [email protected]
Internet: www.able.co.uk
e-procurement: www.247able.com
Registered in England No: 01851002
VAT No: GB 417 2481 61
1
Installation Instructions
& Data Sheet
Wall Mount Humidity & Temperature Sensor
ARH-T-2-I-W
ARH-T-2-I-W
Installation Instructions & Data Sheet
Wall Mount Humidity & Temperature Sensor
Installation
1. Choose an accessible location for the sensor where the surrounding air temperature is representative of the
room. Avoid locating the sensor where it will be subjected to radiant heat.
2. Remove the knockout section from the backplate.
3. Fix the backplate to the wall with washers using the holes provided.
4. Insert cable and connect signal wires to terminals as per below instructions.
5. Clip the sensor onto the backplate making sure that the cables are routed through the cable exit.
Wiring Details
SENSORS
OUTPUTS
Relative Humidity:
Polymer Capacitive
Humidity:
0% RH = 4mA
100% RH = 20mA
Temperature:
PT100 Sensor
Humidity Accuracy:
+ / - 2% (20%-95% RH)
Temperature:
0°C = 4mA
40°C = 20mA
Temperature Accuracy:
+ / - 0.5
o
C
No liability can be accepted for any errors or omissions in relation to the equipment and its application
.
© Able Instruments & Controls Limited 2005. Reproduction by any means in whole or part is strictly
forbidden without express written permission.
Installation Instructions & Data Sheet
Able Instruments & Controls Limited. Cutbush Park, Danehill, Lower Earley, Reading. Berkshire. RG6 4UT. UK.
Tel: +44 (0) 118 9311188 Fax: +44 (0) 118 9312161 Email: [email protected] Web: www.able.co.uk Buy Online: www.247able.com
