Information displayed in the energy meter |
15
Information displayed in the energy meter
Each charge point of the Wallbox eM4 Twin has its own energy meter that shows various information about the
charging operation via the three display lines. In contrast to the top line, the values displayed in lines 2 and 3 are
switched cyclically:
A
Total electric energy consumed
A
B
A
C
A
D
E
The top line always shows the total electric power con-
sumed in kWh, and therefore the sum of all the electrical
charge obtained via this particular charge point. This line
is not switched.
B
Current electric energy consumed
In this state, the second line shows the active energy in
kWh that has been drawn so far during the active charg-
ing operation.
C
Charge point allocation
After switching, the second line in this state shows the
identification that was assigned to the charge point dur-
ing installation.
D
Duration of the charging operation
After switching, the second line in this state shows the
duration of the active charging operation in hours, min-
utes and seconds.
E
Current electric power consumption
In this state, the third line shows the active power that
the vehicle is currently drawing: With no vehicle con-
nected, this value is
0.0 kW
.