15
WALL INSTALLATIoN / FUNCTIoN
Wallbox
5.3 Electrical connection and comissioning
Depending on the actual version, connect the power supply to the
cables marked L1, L2, L3 and N fixed in Wago terminals.
Comissioning should only be carried out by authorized and fully
qualified staff. Always pay attention to relevant national standards.
Please read and follow the safety instructions prior to
commissioning, wall installation or opening the charging box.
6 Function
6.1 Warnings and operation
The symbols specified on the housing of the charging box (see war
ning information in the plug holder and the type plate on the rear)
have the following meanings.
Refer to the operating manual for respective information
Caution high voltages
Electrical protection class II, i.e. there is reinforced
insulation between the main supply circuit and the
output voltage
Refer to the operating manual
Tested CE conformity
Ingress protection of the charging box (protected
against water spray from any direction)
”Warning sticker“ on
the inside
Type plate inside the box
The cable can be routed
at the points with the
centring either from the
top or the bottom.
