Safety and Operating Notices
3
• Do not install this device near radiators, heat storage devices, stoves or other
sources of excessive heat.
• Do not step on the power supply cable, do not kink it and treat plugs and sockets
with special care.
• Only use accessories intended and sold for the device by the manufacturer.
• Do not place containers with liquids on the device, as these may tip over and liq-
uids may enter the device.
Operating instructions / Maintenance
Please note the following instructions for the operation and maintenance of your
eMH1
charging station:
• The device must be connected to the protective earth conductor of your electricity
supply.
• Ensure that the rated voltage and rated current of the device comply with the
parameters of your local electricity grid and that the rated output is not exceeded
during charging operations.
• At all times comply with local safety regulations for the country in which you oper-
ate the device.
• To disconnect the device completely from the power grid, the power supply must
be cut at your domestic miniature circuit breaker (MCB).
• Follow all information and instructions of the manufacturer for installing and operat-
ing the device.
• Do not operate the device in confined spaces.
• Make sure that the front cover shield is always locked to prevent unauthorized
opening of the housing. Keep the key in a place that is known to all authorized us-
ers.
• You must NOT UNDER ANY CIRCUMSTANCES make any changes to the housing
or the internal wiring of the device: Any disregard of this instruction fundamentally
breaches the guarantee provisions and voids the warranty with immediate effect.
