![Abitana ABI-ET2001 Quick Start Manual Download Page 2](http://html1.mh-extra.com/html/abitana/abi-et2001/abi-et2001_quick-start-manual_3403362002.webp)
090810_ABI-ET2001_QSG_ML
English
Page 10
N.V.
abitana
S.A.
ENGLISH
P1
P2
P3
ISDN
L1
L2
P4
A
N.C.
N.C.
L1
L1
L1
L1
L1 PUBLIC analog (PSTN) line
A
A
Remark:
There should be no connections to the ISDN (RJ45).
In this configuration, it is possible to extend the number of phones
connected to the phone line bij connecting L2 of the first ET2001 to L1
of the second one.
P1
P2
P3
ISDN
L1
L2
P4
A
N.C.
N.C.
L1 PUBLIC analog (PSTN) line
L1
L1
L1
L1
A
A
P1
P2
P3
ISDN
L1
L2
P4
A
N.C.
N.C.
L1
L1
L1
L1
A
A
First ET2001 module
Second ET2001 module
5.2
Two analog (PSTN) phone lines
This configuration is used when you have two incoming telephone
lines (standard PSTN). These lines can either come directly from your
operator, or from an ISDN to 2 PSTN lines (TA) adapter.
So BUS
TA
NT
L1
L2
L1
L2
TELECOM
OPERATOR
ISDN Line
TELECOM
OPERATOR
PSTN Lines
- OR -
Line 2 connects to one port (P1), and Line 1 connects to the other
three ports in parallel (P2, P3, P4)
When a call arrives on line L1, all phones on P2 ~P4 will ring at the
same time. You can pick-up any of the three phones connected to that
line to answer the call.
If during a call a second phone is unhooked, this phone will join the
ongoing conversation.
No internal calls between the locations are possible (NO PABX
function).
You can make a phone call from a phone connected to line 1 to a
phone connected to line 2, but this is not a free call, as the call is
processed by your phone company
In this configuration, L2 is usually used for a FAX or a MODEM.
Switch Nr.
Position
S1
A
S2
B
S3
B
For this configuration, the switches must be in the positions indicated
in the preceding table.
P1
P2
P3
ISDN
L1
L2
P4
A
N.C.
L2
B
B
L1
L1
L1
L1 PUBLIC analog (PSTN) line
L2 PUBLIC analog (PSTN) line
5.3
ISDN
5.3.1
3 ISDN Phones and one PSTN line
This setting provides connections for 3 digital (ISDN) phones, and one
standard (PSTN) phone.
This configuration might be as follows :
•
One ISDN line, and one PSTN line, supllied by your Phone
company
•
One ISDN line, supplied by your Phone company, an one PSTN
line, comming from a TA, connected to your ISDN line.
So BUS
TA
NT
L2
L2
- OR -
TELECOM
OPERATOR
ISDN
NT
ISDN
PSTN Line
ISDN Line
TELECOM
OPERATOR ISDN Line