Abit ZM6, User Manual

Page: 26 / 86

2-16 Chapter2
ZM6
Figure 2-10 shows the ZM6 back panel connectors, these connectors are for connection to
outside devices to the motherboard. We will describe which devices will attach to these
connectors below.
MS1 Lower: PS/2 Keyboard Connector
Attach a PS/2 keyboard connector to this 6-
pin Din-connector. If you use an AT
keyboard, you can go to a computer store to
purchase an AT to ATX converter adapter,
then you can connect your AT keyboard to
this connector. We suggest you use a PS/2
keyboard for best compatibility.
MS1 Upper: PS/2 Mouse Connector
Attach a PS/2 mouse to this 6-pin Din-
connector.
USB Port Connectors
This motherboard provides two USB ports.
Attach the USB connector from the
individual device to these connectors. You
can attach USB devices such as a, scanner,
monitor, mouse, keyboard, hub, CD-ROM,
joystick etc. to one of each USB connector.
You must make sure your operating system supports this feature and you may need to install
an additional driver for individual devices. Please refer to your device user’s manual for
detailed information.
Serial Port COM1 and COM2 Connector
This motherboard provides two COM ports,
you can connect an external modem, mouse
or other devices that support this
communication protocol.