Abit VL6 User Manual Download Page 79

Page: 79 / 112

Installing the VIA PCI Audio Drivers for Windows

NT 4.0 Server / Workstation

E-1

User’s Manual

Appendix E.

Installing the VIA PCI Audio

Drivers for Windows

NT 4.0

Server / Workstation

In this section we will show you how to install the VIA PCI audio drives to your Windows

NT 4.0 Server/Workstation operating system. All screen shots are from the Windows

4.0 server version. Before you install the VIA PCI audio drivers, please install Windows

NT 4.0 Service Pack 5 (or the latest version) first. Then you can install the audio drivers.

Note E-1

Details of the Windows

NT 4.0 Server/Workstation operating system are not mentioned

in this manual. If you have any problems with the settings, operating or installing
Windows

NT 4.0 Server / Workstation, please refer to your Windows

NT 4.0

Server/Workstation user's manual or other databases provided by Microsoft

Corporation.

Note E-2

For Windows

NT 4.0 Server/Workstation operating system, you don't need to install the

IDE-USB drivers. But you have to install the Windows

NT 4.0 Service Pack 5 (or latest

version) first.

Insert the VL6 CD-Title into your CD-ROM drive. It should execute the program
automatically. If not, you can go to the CD location and execute the execution file from the
main directory of this CD-Title. Once executed, you will see the screen below.

Move the cursor to “

Drivers

” and click on it.

This will bring you to the to the next screen.

Summary of Contents for VL6

















































































































Search results

Summary of Contents for VL6

Reviews:

Related manuals for VL6

Brands by name

Popular brands

Abit VL6, User Manual

Search results

Summary of Contents for VL6

Reviews:

Related manuals for VL6

Brands by name

Popular brands