Abit SG-80 User Manual Download Page 6

Page: 6 / 56

1-2 Chapter

Back Panel I/O

•

1x PS/2 Keyboard, 1x PS/2 Mouse

•

1x Serial Port, 1x Parallel Port, 1x VGA connector

•

4x USB 2.0, 1x RJ-45 LAN Connector

•

1x Audio connectors (Line-out, Line-in, MIC-in)

Miscellaneous

•

Micro ATX form factor (244mm x 244mm)

Product List

Model Chipset

Features

SG-80

SIS 661FX + 964

10/100 LAN + SATA

SG-81

SIS 661FX + 964L

10/100 LAN

All brand names and trademarks are the property of their respective
owners.

This motherboard is customized for certain system configurations; and
may not fit system integration in all DIY ways. Before integrating this
product, please check ABIT web site for recommended device listings, or
contact sales/tech. support people.

Specifications and information contained herein are subject to change
without notice.

SG-80 Series

Summary of Contents for SG-80

























































Search results

Summary of Contents for SG-80

Reviews:

Related manuals for SG-80

Brands by name

Popular brands

Abit SG-80, User Manual

Search results

Summary of Contents for SG-80

Reviews:

Related manuals for SG-80

Brands by name

Popular brands