BIOS Setup
3-19
KB Power On Password:
When you perss the <
Enter
> key, then you can enter the password you want. When set be done, you need
to saving and leave the BIOS setting menu to reboot your computer system.
Next time when you
shutdown your computer, you can’t use the power button to turn on the computer power anymore.
You need to press the password to turn on your computer power.
Hot Key Power On:
Fifteen options are available: Ctrl+F1 ~ Ctrl+F12, Power, Wake and Any Key. The default setting is
Ctrl+F1
. You can choose the hot key that you want it to turn on your computer power.
Onboard FDC Controller:
Two options are available: Enabled and Disabled. The default setting is
Enabled
. You can enable or
disable the onboard FDC controller.
Onboard Serial Port 1:
This is used to specify the I/O address and IRQ of Serial Port 1. Six options are available: Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
AUTO. The default setting is
3F8/IRQ4
.
Onboard Parallel Port:
This item specifies the I/O address used by the parallel port.
[Disabled]:
This option prevents the parallel port from accessing any system resources. When the value
of this option is set to [Disabled], the printer port becomes unavailable.
[378/IRQ7]:
This option allows the parallel port to use [378/IRQ7] as its I/O port address. The majority
of parallel ports on computer systems use IRQ7 and I/O Port 378H as the standard setting.
[278/IRQ5]:
This option allows the parallel port to use [278
/
IRQ5] as its I/O port address.
[3BC/IRQ7]:
This option allows the parallel port to use [3BC
/
IRQ7] as its I/O port address.
Parallel Port Mode:
This item specifies the parallel port mode.
[Normal]:
Allows the standard parallel port mode to be used.
[SPP]:
(Standard Parallel Port) Allows bi-directional parallel port operation at normal speed.
[EPP]:
(Enhanced Parallel Port) Allows bi-directional parallel port operation at maximum speed.
[ECP]
: (Extended Capabilities Port) Allows bi-directional parallel port operation at a speed faster than
the normal mode’s data transfer rate.
[ECP+EPP]:
Allows parallel port operation at ECP and EPP mode.
EPP Mode Select:
This item selects the EPP mode.
ECP Mode Use DMA:
This item selects the DMA channel of the parallel port.
User’s Manual
Summary of Contents for KW7-G
