Abit KN9S User Manual Download

Page: 55 / 72

BIOS Setup

KN9 SLI, KN9 Ultra, KN9S

3-21

FanEQ Start Control

This item sets a specific speed for the fan when it is turned on. The fan will be turned on once
the CPU temperature exceeds the high limit temperature set by the above 2 items.

FanEQ Stop Control

This item sets a minimum speed for the fan. The fan will be running at this speed when the
CPU temperature is below the low limit temperature.

All Voltages, Fans Speed and Thermal Monitoring

These unchangeable items list the current status of the CPU and environment temperatures, fan
speeds, and system power voltage.

3.9 Load Fail-Safe Defaults

This option loads the BIOS default values for the most stable, minimal-performance system
operations.

3.10 Load Optimized Defaults

This option loads the BIOS default values that are factory settings for optimal-performance
system operations.

3.11 Set Password

This option protects the BIOS configuration or restricts access to the computer itself.

3.12 Save & Exit Setup

This option saves your selections and exits the BIOS setup menu.

3.13 Exit Without Saving

This option exits the BIOS setup menu without saving any changes.

Summary of Contents for KN9S









































































Search results

Summary of Contents for KN9S

Reviews:

Related manuals for KN9S

Brands by name

Popular brands

Abit KN9S, User Manual

Search results

Summary of Contents for KN9S

Reviews:

Related manuals for KN9S

Brands by name

Popular brands