manualshive.com logo in svg

Abit KN9S, User Manual

Share
Download
Abit KN9S User Manual Download Page 51

BIOS Setup 

 

KN9 SLI, KN9 Ultra, KN9S 

3-17 

※ 

Do not forget your password, or you will have to clear the CMOS and reset all 
parameters in order to utilize this function again.

 

- 

Hot Key Power ON 

This item powers on the system by pressing <Ctrl> key plus one of each function key (<F1> ~ 
<F12>) simultaneously. 

Restore on AC Power Loss 

This item selects the system action after an AC power failure. 

[Power Off]:

 When power returns after an AC power failure, the system’s power remains off. 

You must press the Power button to power-on the system.

 

[Power On]:

 When power returns after an AC power failure, the system’s power will be 

powered on automatically.

 

[Last State]: 

When power returns after an AC power failure, the system will return to the 

state where you left off before power failure occurs. If the system’s power is off when AC 
power failure occurs, it will remain off when power returns. If the system’s power is on when 
AC power failure occurs, the system will power-on when power returns. 

Summary of Contents for KN9S









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands