Abit IP35 User Manual Download Page 54

Page: 54 / 88

3-4

IP35 Pro

3.5 LAN Driver

To install this program:

Click on the [

Drivers

] tab in the

installation menu screen.

Click the [

LAN Driver

] item. The

installation screen appears.

Follow the prompts on the screen to

complete installation.

3.6 JMicron SATA Driver

This driver provides functionality for the onboard SATA RAID Controller.

※

This driver installation is necessary for the devices connected through
connectors “eSATA1” or “IDE1”.

To install this program:

Click on the [

Drivers

] tab in the

installation menu screen.

Click the [

JMicron SATA Driver

] item.

The installation screen appears.

Follow the prompts on the screen to
complete installation.

3.7 USB 2.0 Driver

※

There is no need to install this driver for Windows 2000 with Service Pack 4,

Windows XP with Service Pack 1, or their later version.

Summary of Contents for IP35

























































































Search results

Summary of Contents for IP35

Reviews:

Related manuals for IP35

Brands by name

Popular brands

Abit IP35, User Manual

Search results

Summary of Contents for IP35

Reviews:

Related manuals for IP35

Brands by name

Popular brands