Abit IN9 32X User Manual Download Page 56

Page: 56 / 96

3-2

IN9 32X/IN9 32X -MAX

3.2 nVidia nForce Chipset Driver

To install this program:

Click on the [

Drivers

] tab in the

installation menu screen.

Click the [

nVidia nForce Chipset

Driver

] item. The installation screen

appears.

Follow the prompts on the screen to
complete installation.

※

Please install this nVidia nForce
Chipset Driver first after having
installed the Windows operating
system.

3.3 Realtek HD Audio Driver

To install this program:

Click on the [

Drivers

] tab in the

installation menu screen.

Click the [

Realtek HD Audio Driver

]

item. The installation screen appears.

Follow the prompts on the screen to
complete installation.

After restarting the system, right-click
the Sound Manager icon located at the
desktop shortcut. Click item “

Sound

Manager

”. The Realtek HD Audio

Manager appears.

Summary of Contents for IN9 32X

































































































Search results

Summary of Contents for IN9 32X

Reviews:

Related manuals for IN9 32X

Brands by name

Popular brands

Abit IN9 32X, User Manual

Search results

Summary of Contents for IN9 32X

Reviews:

Related manuals for IN9 32X

Brands by name

Popular brands