Abit IN9 32X User Manual Download Page 54

Page: 54 / 96

2-24

IN9 32X/IN9 32X -MAX

PCI/VGA Palette Snoop

This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not.

[Enabled]:

MPEG ISA/VESA VGA cards work with PCI/VGA.

[Disabled]:

MPEG ISA/VESA VGA cards do not work with PCI/VGA.

Maximum Payload Size

This item sets the maximum TLP payload size for the PCI Express devices.

2.8 Load Fail-Safe Defaults

This option loads the BIOS default values for the most stable, minimal-performance system
operations.

2.9 Load Optimized Defaults

This option loads the BIOS default values that are factory settings for optimal-performance
system operations.

2.10 Set Password

This option protects the BIOS configuration or restricts access to the computer itself.

2.11 Save & Exit Setup

This option saves your selections and exits the BIOS setup menu.

2.12 Exit Without Saving

This option exits the BIOS setup menu without saving any changes.

Summary of Contents for IN9 32X

































































































Search results

Summary of Contents for IN9 32X

Reviews:

Related manuals for IN9 32X

Brands by name

Popular brands

Abit IN9 32X, User Manual

Search results

Summary of Contents for IN9 32X

Reviews:

Related manuals for IN9 32X

Brands by name

Popular brands