Abit IL-90MV User Manual Download | Manualshive

Page: 39 / 72

background image

BIOS Setup

iL-90MV

3-11

An unmatched configuration will cause the display device abnormal. For example, an HDMI
digital device connected to “HDMI Port” under the [DVI] selection will have no sound on the
digital display, whereas a non-HDMI monitor connected to “HDMI Port” under the [Normal]
selection will cause the screen flickering. Select the correct one for your display device.

Frame Buffer Size

This item selects the size of memory pre-allocated for frame buffer.

DVMT Mode

This item selects the mode of graphics memory that the system will support.

DVMT/FIXED Memory Size

This item selects the size of graphics memory that the system will support.

«
...
37
38
39
40
41
...
»

Summary of Contents for IL-90MV









































































Reviews:

No comments

Related manuals for IL-90MV

Brand: IEI Technology Pages: 12

Brand: IEI Technology Pages: 190

Brand: IEI Technology Pages: 8

Brand: IEI Technology Pages: 193

Brand: IEI Technology Pages: 182

KINO-DBT Series

Brand: IEI Technology Pages: 133

Brand: ST Pages: 79

Brand: DFI Pages: 8

Brand: VIA Technologies Pages: 76

C5535 DSPShield

Brand: Texas Instruments Pages: 49

Brand: Icop Pages: 40

Brand: Unicorn Computer Pages: 36

Brand: MINATO Pages: 125

Brand: Maxim Pages: 7

Brand: Global American Pages: 135

Brand: Safran Pages: 29

Brand: VIA Technologies Pages: 26

ISL71026MEVAL1Z

Brand: Intersil Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands