※
Don’t forget your password. If you forget the password, you will have to open
the computer case and clear all information in the CMOS before you can start up
the system. But by doing this, you will have to reset all previously set options.
MPS Version Ctrl For OS
This item specifies which version of MPS (Multi-Processor Specification) this motherboard will
use. Leave this item to its default setting.
Delay IDE Initial (Secs)
This item allows the BIOS to support some old or special IDE devices by prolonging this delay
time. A larger value will give more delay time to the device for which to initialize and to prepare
for activation.
Full Screen LOGO Show
This item determines to show the full screen logo when booting.
Disable Unused PCI Clock
This option disables the clock of PCI slot that is not in use.
[Yes]:
The system automatically detect the unused DIMM and PCI slots, and stop sending
clock signal to these unused PCI slots.
[No]:
The system always send clock signal to all PCI slots.
※
Set this option to [No] setting if there are adapters that cannot be automatically
detected by the system and will cause malfunction.
3-8
iL-90MV
Summary of Contents for IL-90MV
Page 7: ...Introduction 1 2 Motherboard Layout iL 90MV 1 3 ...
Page 8: ...1 4 iL 90MV ...
Page 66: ...4 14 iL 90MV ...
Page 72: ...P N 4310 0000 37 Rev 2 00 http www abit com tw ...
