2-10
IB9
[Yes]:
The system automatically detect the unused DIMM and PCI slots, and stop sending
clock signal to these unused PCI slots.
[No]:
The system always send clock signal to all PCI slots.
※
Set this option to [No] setting if there are adapters that cannot be
automatically detected by the system and will cause malfunction.
2.4 Advanced Chipset Features
Phoenix – AwardBIOS CMOS Setup Utility
Advanced Chipset Features
DRAM Timing Selectable
By SPD
Item Help
X - CAS Latency Time
(tCL)
Auto
X - RAS# to CAS# Delay (tRCD)
Auto
X - RAS# Precharge
(tRP)
Auto
X - Precharge Delay
(tRAS)
Auto
X - Command Rate
Auto
X - tRFC
Auto
► PCI Express Root Port Func
Press Enter
Init Display First
PCI Slot
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
DRAM Timing Selectable
This item sets the optimal timings for the following four items, depending on the memory
module you are using. The default setting “By SPD” configures these four items by reading the
contents in the SPD (Serial Presence Detect) device. The EEPROM on the memory module
stores critical parameter information about the module, such as memory type, size, speed,
voltage interface, and module banks. The following items will be available to make adjustments
by selecting option [
Manual]
.
-
CAS Latency Time (tCL)
-
RAS# to CAS# Delay (tRCD)
-
RAS# Precharge (tRP)
-
Precharge Delay (tRAS)
- Command
Rate
- tRFC
Summary of Contents for IB9
Page 6: ...1 2 IB9 1 2 Motherboard Layout ...
Page 77: ...Multilingual QIG IB9 4 25 4 13 Arabic ...
Page 78: ...4 26 IB9 ...
Page 100: ...P N 4310 0000 47 Rev 1 00 http www abit com tw ...
