Abit GD8 User Manual Download

Page: 71 / 72

How to Get Technical Support

J-3

North America and

South America

ABIT Computer (U.S.A.) Corporation

45531 Northport Loop West, Fremont CA, 94538,
U.S.A.
Tel: 1-510-623-0500
Fax: 1-510-623-1092
Sales: [email protected]
Latin America Sales: [email protected]
Marketing: [email protected]
Web Site: http://www.abit-usa.com

RMA Center

46808 Lakeview Blvd. Fremont, CA 94538, U.S.A.

UK and Ireland

ABIT Computer (U.K.) Corporation Ltd.

Unit 3, 24-26 Boulton Road, Stevenage, Herts SG1
4QX, UK
Tel: 44-1438-228888
Fax: 44-1438-226333
E-mail: [email protected]

Germany and Benelux (Belgium,

Netherlands, Luxembourg),

France, Italy, Spain, Portugal,

Greece, Denmark, Norway,

Sweden, Finland, and

Switzerland

AMOR Computer B.V. (ABIT's European Office)

Jan van Riebeeckweg 15, 5928LG, Venlo,
The Netherlands
Tel: 31-77-3204428
Fax: 31-77-3204420
Sales: [email protected]
Web Site: http://www.abit.nl

Austria, Czech, Romania,

Bulgaria, Slovakia, Croatia,

Bosnia, Serbia, and Macedonia

Asguard Computer Ges.m.b.H

Schmalbachstrasse 5, A-2201 Gerasdorf / Wien,
Austria
Tel: 43-1-7346709
Fax: 43-1-7346713
E-mail: [email protected]

Shanghai

ABIT Computer (Shanghai) Co. Ltd.

Tel: 86-21-6235-1829
Fax: 86-21-6235-1832
Web Site: http://www.abit.com.cn

Russia and CIS

ABIT Computer (Russia) Co. Ltd.

Sales: [email protected]
Info: [email protected]
Web Site: http://www.abit.ru

User’s Manual

Summary of Contents for GD8









































































Search results

Summary of Contents for GD8

Reviews:

Related manuals for GD8

Brands by name

Popular brands

Abit GD8, User Manual

Search results

Summary of Contents for GD8

Reviews:

Related manuals for GD8

Brands by name

Popular brands