manualshive.com logo in svg

Abit DigiDice AB-2003, User Manual

Share
Download
Abit DigiDice AB-2003 User Manual Download Page 80

4-20 Chapter 

4 

4.7. PnP/PCI 

Configurations 

 

Force Update ESCD: 

When set to [Enabled], the BIOS will reset the ESCD (Extended System 
Configuration Data) once automatically next time you boot up. It will then recreate a 
new set of configuration data. But the next time you boot up, this option will 
automatically be set as Disabled. 

NOTE: 

The ESCD (Extended System Configuration Data) contains the IRQ, DMA, 

I/O port, memory information of the system. This is a specification and a feature 
specific to the Plug & Play BIOS. 

Reset Configuration Data: 

When set to [Enabled], the BIOS will reset the ESCD (Extended System 
Configuration Data) once automatically next time you boot up. It will then recreate a 
new set of configuration data. But the next time you boot up, this option will 
automatically be set as Disabled. 

Resources Controlled By: 

This item configures all of the boot and Plug-and-Play compatible devices. 

[Auto(ESCD)]: The system will automatically detect the settings. 

AB-2003 DigiDice 

Summary of Contents for DigiDice AB-2003









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands