manualshive.com logo in svg

Abit BG-72, User Manual, Page: 37 / 56

Share
Download
Abit BG-72 User Manual Download Page 37

BIOS Setup 

3-17 

! 

Master/Slave Drive Ultra DMA 

Each IDE channel supports a master device and a slave device. This motherboard 
supports Ultra DMA technology, which provides faster access to IDE devices. If you 
install a device that supports Ultra DMA, change the appropriate item on this list to 
Auto. You may have to install the Ultra DMA driver supplied with this motherboard 
in order to use an Ultra DMA device. 

USB Controller 

This option enables or disables the USB controller. 

! 

USB 2.0 Controller 

This option enables or disables the USB 2.0 controller. 

! 

USB Keyboard Support Via 

This item allows you to select [

BIOS

] for using USB keyboard in DOS environment, 

or [

OS

] in OS environment.   

! 

USB Mouse Support Via 

This item allows you to select [

BIOS

] for using USB mouse in DOS environment, or 

[

OS

] in OS environment. 

AC97 Audio 

Enables or disables the onboard AC97 audio function. Disable this item if you are 
going to install a PCI audio add-on card.

 

Onboard LAN Device 

Enables and disables the onboard LAN chip. 

Onboard LAN Boot ROM 

Use this item to enable and disable the booting from the onboard LAN or a network 
add-in card with a remote boot ROM installed. 

Init Display First 

Use this item to specify whether your graphics adapter is installed in one of the PCI 
slots or is integrated on the motherboard. 

User’s Manual 

Summary of Contents for BG-72

























































Reviews:

No comments