Abit AN8-3rd Eye, User Manual

Page: 63 / 104

BIOS Setup 3-13
3-3. Advanced BIOS Features
Phoenix – Award WorkstationBIOS CMOS Setup Utility
Advanced BIOS Features
► Removable Device Priority Press Enter Item Help
► Hard Disk Boot Priority Press Enter
► CD-ROM Boot Priority Press Enter
First Boot Device Removable
Second Boot Device CD-ROM
Third Boot Device Hard Disk
Boot Other Device Enabled
Swap Floppy Drive Disabled
Boot Up Floppy Seek Disabled
Boot Up NumLock Status On
Security Option Setup
MPS Version Ctrl For OS 1.4
Delay For HDD (Secs) 0
Full Screen Logo Show Disabled
Disable Unused PCI Clock Enable
↑↓
:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Removable Device Priority:
This item allows you to select the booting priority of removable devices.
Hard Disk Boot Priority:
This item selects the hard disks booting priority. By pressing <Enter> key, you can enter its submenu
where the hard disks detected can be selected for the booting sequence to boot up system.
This item functions only when there is the option of [Hard Disk] in any one of the First/Second/Third
Boot Device items.
CD-ROM Boot Priority:
This item allows you to select the booting priority of CD-ROM devices.
NOTE: This item appears only if you install CD-ROM devices to your computer.
First Boot Device / Second Boot Device / Third Boot Device / Boot Other Device:
Select the drive to boot first, second and third in the [First Boot Device], [Second Boot Device], and
[Third Boot Device] items respectively. The BIOS will boot the operating system according to the
sequence of the drive selected. Set [Boot Other Device] to [Enabled] if you wish to boot from another
device other than these three items.
Swap Floppy Drive:
When set to [Enabled], and the system is booting from the floppy drive, the system will boot from drive B
instead of the regular drive A. There must be two floppy drives connected in the system to use this
function.
User’s Manual