Driver & Utility CD
AB9 Pro, AB9
4-11
4.11 JMicron SATA RAID Driver Disk Maker
This procedure is necessary if there is access to the devices connected to connectors “SATA8”,
“SATA9”, and “IDE1” during the OS installation:
1.
Prepare a 3.5” floppy disk drive and connect it to “FDC1” connector on this motherboard.
2.
Start install operating system.
3.
Insert this driver disk into floppy disk drive when the screen instruction prompts you to
install a third-party SCSI or RAID driver.
4.
Press <F6> key, and then follow the screen instruction to complete the installation.
※
This procedure is particularly necessary when you want to install operating
system from a CD-ROM drive connected through connectors “SATA8”, “SATA9”,
or “IDE1”.
To create a driver disk:
1.
Click on the [Utility] tab in the installation menu screen.
2.
Click the [JMicron SATA RAID Driver Disk Maker] item. The installation screen appears:
Insert one blank floppy disk to the selected floppy drive and click [Build].
3.
Click [OK] to finish building the SATA Driver Disk.
4.
Click [Exit] to exit the Floppy Disk Generator.
