Abit AB9 Pro Page 48 User Manual Download

Page: 48 / 80

Boot Up NumLock Status

This item determines the default state of the numeric keypad at system booting up.

[On]:

The numeric keypad functions as number keys.

[Off]:

The numeric keypad functions as arrow keys.

Security Option

This item determines when the system will prompt for password - every time the system boots
or only when enters the BIOS setup.

[Setup]:

The password is required only when accessing the BIOS Setup.

[System]:

The password is required each time the computer boots up.

※

Don’t forget your password. If you forget the password, you will have to open
the computer case and clear all information in the CMOS before you can start up
the system. But by doing this, you will have to reset all previously set options.

MPS Version Ctrl For OS

This item specifies which version of MPS (Multi-Processor Specification) this motherboard will
use. Leave this item at its default setting.

Report No FDD For OS

When set to [Yes], this item allows you to run some older operating system without floppy disk
drive. Leave this item at its default setting.

Full Screen LOGO Show

This item determines if the full screen logo is shown when booting.

3-16

AB9 Pro, AB9

Summary of Contents for AB9 Pro

















































































Search results

Summary of Contents for AB9 Pro

Reviews:

Related manuals for AB9 Pro

Brands by name

Popular brands

Abit AB9 Pro, User Manual

Search results

Summary of Contents for AB9 Pro

Reviews:

Related manuals for AB9 Pro

Brands by name

Popular brands