16
The reading language and language of the document need to match. If the language of
the document does not match the selected reading language, the text recognition will
not be accurate.
To Navigate Through Text:
The five standard
Daisy Buttons
are used for text navigation. Pressing the left or right
arrow button allows you to, respectively, move to the previous or next word. The Ace
Plus reads aloud. Pressing the up or down arrow buttons allows you to, respectively,
move to the top or bottom of the page. Scrolling up or down with the Right Roller
allows you to move, respectively, to the previous or next line. Press and hold the Daisy
center button while repeatedly pressing the right arrow button to spell out the next
word. Press and hold the Daisy center button while pressing the left arrow button to
spell out the previous word. Press the Action Button to pause or resume reading.
By default, the Ace Plus will recognize
text columns
as separate pages. If you wish to
disable the column recognition in order to accurately read tabulated text, press and
hold the left and right arrow buttons simultaneously until you hear the announcement,
"switched to table mode." Press the same two buttons again when you want to switch
back.
Press the up and down arrow buttons simultaneously to hear the orientation of the
document.
Text Mode
In Text Mode, the scanned document is presented on the screen as an electronic book
(e-book). The number of lines on the page depends on magnification. Because the
width of the Ace Plus screen is the same as the width of a letter-size page, you can
read your document as if it were a large font e-book, where you control the size of the
font with the Left Roller. (Please note: the Left Roller Mode must be at it
s default “Font
Magnification” mode in order to be able to control the size of the font. See the previous
section for instructions on how to switch Left Roller Mode options). Use the Right
Roller to move one line up/down.
Generic Scan and Read Settings
Generic Scan and Read settings apply to both reading modes.
Font, Font Size, Contrast:
In order to adjust the setting for your preferred font, font size or contrast, press the
Home
Button to go the
Main Menu
. Use the
Right Roller
to scroll down to the
Settings
menu item. Press the
Action Button
to confirm the menu item selection.
Use the
Right Roller
to scroll down to
General Settings
. Press the
Action Button
to
select this menu choice. Then, use the
Right Roller
to scroll down to one of the
