2. Display II for Routine Maintenance -
After the routine maintenance is finished, the user could
setup the mileage for next maintenance. (Count down setting) Setup steps:
1. Press ‘Mode’ button and switch to ODO mode.
2. Key off to shut down the controller.
3. Press ‘Mode’ and ‘H/L’ buttons together.
4. Key on to start the controller.
5. The display will enter setup mode in 2 seconds, the mileage will be flashing. (Note 1)
6. Press or button to adjust to the mileage for next maintenance. (Note 2)
7. After setup is finished, press any button of the Parking light, Horn, Indicator or Headlight,
the definitive settings will be stored and return to normal working mode.
8. The display will quit to normal working mode if the user does not press the button within
10 seconds.
Note 1: Setup mode.
The mileage counts down to 0km. The mileage does not count down to 0km.
Note 2:
Press or button to adjust to the mileage for next maintenance.
Press to increase the mileage:
1000 - 2000 - 3000 - 4000 - 5000 - OFF - 1000. (Displays in cycling).
Press to decrease the mileage:
OFF - 5000 - 4000 - 3000 - 2000 - 1000 - OFF. (Displays in cycling).
Digital High/Low Speed Control
1. Operation Failure -
Press ‘H/L Speed’ button to switch High/Low speed. Press or to fine
tune in 5 speeds.
2. Control Mode -
Press ‘H/L Speed’ button once,
the High/Low Speed Indicator (labelled H)
will light on. Press again, the indicator
light will turn off.
Press button to increase the speed.
Press button to decrease the speed.
3. Usage Condition -
While (1) controller
shut down (2) in charging-mode, the
function will be disabled.
14