AI IP Camera Quick Start Guide
2.12-4 Audio and alarm cable installation
Connect the ground cable to ground the device, and then connect the power cable. If
crimp terminals are not used, the wire thickness cannot exceed 1.5mm
2
, and the length
cannot exceed 25m. If crimp terminals are used, the wire
can be up to 0.75mm2 for a 15m length of wiring or up
to 1.0mm2 if 20m is required. Longer wiring is not
supported. The ground impedance cannot exceed 5
ohms.
2.12-5 Network cable installation
Connect the network cable. Mount the number O-ring for the waterproof connector
onto the network cable port and install the remaining components of the waterproof
connector in the sequence shown below. The waterproof connectors of the network
cable must be secured tightly or they may come loose later.
※
install network waterproof component
