18
Lubrication
Apply 10 ml of the the included oil on the sponge end of the included lubrication stick. Insert the
stick underneath the running belt with the oily sponge facing down towards the wooden board. Start
by the motor hood and run the stick in a zigzag pattern halfway down the deck. Apply another 10 ml
of the included oil to the lubrication stick, and repeat the procedure. Then, set the running belt to
move at a speed of 5 kph for five minutes.
Cleaning
After 100 hours of use, drag the lubrication stick underneat the running belt from top to bottom. Use
the end of the stick that has
not
previously been used for oiling the running belt. Then, apply 10 ml
of the included oil to the lubrication stick, and apply oil to the running belt as described above.
Repeat for ever 100 hours of use. Should the treadmill stop on its own accord, it could be in need of
lubrication.
THE TREADMILL MUST BE LUBRICATED BEFORE USE