Air pressure
The optimal pressure level depends on the skill level and weight of the users, as well as the type of sports
and preferred effect.
The bounciness of the AirTrack depends on how much air you fill in it. If filled up to the maximum pressure, the
AirTrack can feel exactly like a
“dead” floor (which is useful for competition training). Inflating it to a standard
level will make it optimal for low to mid level training, while inflating it to a minimum level will make it more fun
for recreational purposes.
Deflation and Packing
Open the valve and press the pin inside the valve to start the deflation.
When most of the air is out
fold the AirTrack one time. Fold it the 2end time and roll it up
towards the valve
so it remain unblocked for as long as possible
.
After rolling up the AirTrack close the valve. This prevents the
cap from damaging the valve screw thread.
The plastic pin had to be in the lower position before deflation.
If not in use, pls clean it up, keep it dry, fold it into the box and keep it well stored.
Valve instruction - Problem solving
When there is air-leak from the valve or if the air can not be inflated into the air track, pls check the position of
the plastic pin first, keep it in the upper position. If it's not ok, pls follow case 2
2. The valve may sometimes loosen, pls use the wrench to tighten it.
3. If the valve is broken, you can also use the wrench to replace it. Then pls. contact our service department to
order a new valve.
When loosen, pls use the wrench to tighten the valve.
When broken, pls use the wrench to change the valve.
Summary of Contents for 372 926
Page 1: ...Art nr 372 926...
Page 18: ...18...
