Abilica 300 594, Manual

Page: 5 / 35

5
DELELISTE / DELLISTA / PARTS LIST
Part no. Description Specification Q'ty
1 Computer SM-5856-64 1
2 Handlebar post welding set 1
4 Pin D6*26.5*7.7 2
5 stabilizer D60x1.5Tx440L 1
6 Pulling rope D5*2000L 1
7 Foam roller D25.4*400*1.4T 1
8 Half-ball cap D25.4*31L 2
9 Foam D23x4Tx400L 1
10 Foot pedal 315*137.5*67 2
11 Strap 440*50 2
12 Rear cover 330*196*69 1
13 Rear supporting bracket set 1
15 Bushing D10.5*D7.5*9T 1
16 Horizontal axle D12*436L 1
17 Ball knob D50*M10*1.5*115.5L 1
18 Pulley bracket JD2300 1
19 Sliding beam 115*69.5*1210L 1
20 Supporting fixing set 63*59*110*3T 1
21 Fixing set for sensor 30*28*21 1
22 Main frame 1
23 Cross bolt ST4.2*15L ST4.2*1.4*15L 2
24 Seat 380*280*35,DD-PU21-5 1
25 Supporting bracket for seat 1
26 Pulley D32*D18*10 2
27 Hex nut D9.5x5T D9.5x5T(3/8"-26UNF) 3
28 Lower computer cable (I) 450L 1
29 Sensor (I) 1100L 1
30 Lower computer cable 450L 1
31 Tension cable D1.5x400 1
32 Sensor 1100L 1
33 Motor 1
34 Wheel for pulling rope D160*76L 1
35 Anti-loosen nut 3/8"-26UNFx6.5T 3/8"-26UNFx6.5T 4
36 Bushing D13.5*D10*9 2
37 Pulley D45*26L 1
38A Upper computer cable 450L 1
38B Lower computer cable 600L 1
39 Round magnet M02 4
40 Plastic flat washer D10*D24*0.4T D10*D24*0.4T 1
41 Spring D2.2*D14*65L D2.2*D14*65L 1
42 Plastic cover D3*30L D3*30L 2
43 Allen bolt M10*35L M10*35L 1
44 Idle wheel D42*D38*24 1