Abilia Progress Micro USB, Manual, Page: 34 / 45

34
X10-IR543
Control of light with X10
system
Brief Guide to Programming the
Jupiter Loudspeaker Telephone with Progress PC
The manual for Gewa Jupiter gives more information.
1)
This page functions with Gewa Jupiter's factory defaults. Restore Jupiter to
the factory defaults by the following procedure:
1. Add this page to Progress PC.
2. Go to this page, which allows the user to control Jupiter, in Progress PC.
3. Press on Jupiter.
4. Press and hold down
1 on Progress PC for 5 seconds, until the indicator
lamp on Jupiter flashes red.
5. Press
*
,
0
,
#
,
within 3 seconds on Jupiter.
6. Press 3 , 4 , # on Jupiter. The indicator lamp now flashes three times as a
confirmation.
2)
These pages use GewaLink channels 16-47 divided into two pages. One
page is used for dialling individual numbers (JUP DIAL GL 16-47), while the
other is used for directly dialled numbers (JUP DIR KEY GL 16-47). Use these
pages by following this procedure:
1. Add these pages to Progress PC.
2. Go to the page entitled JUP DIAL 16-47, which allows the user to control
Jupiter, in Progress PC.
3. Press on Jupiter.
4. Press and hold down
1
on Progress PC for 5 seconds, until the indicator
lamp on Jupiter flashes red.
5. Press
*
,
0
,
#
,
within 3 seconds on Jupiter.