BAL.0212.0 • 2018-07-16
EN - 7
PP
4 Putting into operation
4.1 Equipping the torch
Equip the torch neck according to one of the following figures:
DANGER
Risk of injury and device damage when handled by unauthorised persons
Improper repair work and modifications to the product may lead to serious injuries and
damage to the device. The product warranty will be rendered invalid if work is carried out on
the product by unauthorised persons.
• Operating, maintenance, cleaning and repair work must only be carried out by qualified
personnel (in Germany, see TRBS 1203).
NOTICE
• Please take note of the following instructions:
CAUTION
Risk of injury
Puncture or cut-in wounds may be caused by the wire electrode.
• Keep your hands out of the danger zone.
• Wear the correct protective gloves.
1
Types 24/36/240D
2
Contact tip
3
Tip adaptor
4
Gas diffuser
5
Torch neck
6
Type 401D
7
Gas nozzle
Fig. 1
Equipping the torch
7
5
1
2
3
4
6
NOTICE
• Slide the gas nozzle on the torch neck rotating it slightly clockwise.
