Operator Box V2
1 Identification
EN
-
3
1 Identification
The operator box is connected to a robot control system and makes it possible to externally control the robot.
These operating instructions exclusively describe the Operator Box V2 software and are only valid
in conjunction with the documentation for the robot control system and the other system components.
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced.
A corresponding marking has been affixed to the product, if required.
1.2 Signs and symbols used
The following signs and symbols are used:
1.3 Classification of the warnings
The warnings are divided into four different categories and are indicated prior to potentially dangerous
work steps. Depending on the type of danger, the following signal words will be used:
2 Safety
This chapter provides basic safety instructions and warnings about residual hazards that should be kept in
mind in order to operate the product safely. Non-observance of the safety instructions may result in risks to
the life and health of personnel as well as cause environmental or material damage.
2.1 Designated use
The device described in these instructions may be used only for the purpose and in the manner described in
these operating instructions. When doing so, please observe the operating, maintenance, and servicing
conditions. Unauthorized modifications or changes to enhance the performance are not permitted.
► Do not exceed the maximum load data specified in the documentation. Overloads lead to destruction.
► Do not make any structural modifications to the product.
► During welding work outdoors, use suitable protection against the weather conditions.
General instructions.
Steps to be carried out in succession.
Lists.
Cross-reference symbol indicating detailed, supplementary, or further information.
Caption, item description.
1
A
DANGER
Describes an imminent threatening danger. If not avoided, it may cause severe injuries or death.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in death or serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results, material damage, or irreparable damage to the device or
equipment.