MasterLiner Maxi Flex/HD; Basic Flex/HD
EN - 5
(*) Note the tensile strength of the MasterLiner used.
Type
Pro-
tective
corru-
gated
pipe
Kevlar sheath
Outer
ø mm
Wire ø
range mm
Max. wire feed
speed m/min
Smallest
permissible
bending
radius mm
Weight
per g/m
Tensile
strength
N
Max. rec.
wire feed
distance
1
Area of
application
type
Basic Flex
34
0.8 – 1.2
30
150
2
/300
3
490
600
25 m
A
Basic HD
27
530
1,500
A, B
Maxi Flex
34
1.2 – 4.0
610
600
A
Maxi HD
32
540
1,500
A, B
Tab. 3
MasterLiner versions
1 Without auxiliary drive (depending on the process and the system setup)
2 With dynamic laying
3 Bending radius during wire inching
Type A
Type B
Arc welding and soldering applications
Robot welding and soldering applications
Machine applications, submerged arc welding applications, flame
spraying applications and arc welding and soldering applications
Machine applications, submerged arc welding applications,
flame spraying applications
Medium mechanical loads
High mechanical loads
Suitable for laying in cable carrier chains *
Suitable for laying in cable carrier chains *
Tab. 4
Areas of application
CAUTION
Wire feed irregularities
Wire feed irregularities due to the lowest permissible bending radii being breached, the number of bending
radii and wire feed distances exceeding 25 m.
• Please note the specifications with regard to the permissible bending angles, bending radii and maximum
lengths.
3.2 Suspension/total bending angle of all bending radii on page EN-6
• Use an additional drive in the event of wire feed distances of over 25 m.
MasterLiner HD
with QC quick connector and threaded connection
MasterLiner Flex
with QC quick connector and threaded connection
Basic HD G1/4
Basic Flex G1/8
Hose ø 27 mm
Hose ø 34 mm
Largest ø 32 mm
Largest ø 34 mm
Maxi HD G1/4
Basic Flex G1/4
Hose ø 34 mm
Hose ø 34 mm
Largest ø 40 mm
Largest ø 38 mm
Tab. 5
MasterLiner connections
