Abicor Binzel ABITIG MT Series, Operating Instructions Manual

Page: 24 / 92

EN - 6 BAL.0107 • 2019-06-19
3 Product Description ABITIG
®
MT
*According to EN 60 974-7 the value for alternating current (AC) must be given at 70% of the
tested direct current value (DC). All data refer to 4 m hose assemblies. For any further
information regarding the available hose assembly designs and performance data, please refer
to the order documentation.
Type of voltage DC or AC
DC polarity of the electrodes Usually negative
Type of use automatic
Voltage rating 141 V peak value
Max. arc ignition and stabilization voltage 12 kV
Protection type of the machine side
connections (EN 60 529) IP2X
Shielding gas (DIN EN ISO 14175) Argon
Electrode commercially available tungsten
electrodes suitable for TIG use,
preferably low-radiation
Required cooling unit capacity 800 W
Tab. 3 General torch data (EN 60 974-7)
Type Type of
cooling Load ED Electrode

Gas
flow Cooling Torch inlet
pressure
ABITIG
®
MT DC AC* Max. supply
temp. Min.
flow min. max.
A A % mm l/min °C l/min bar bar
260W liquid 260 180 100 1,0 - 3.2 7 - 20 50 0.7 2.5 3.5
200W air 200 140 60 1.6 - 4.0 7 - 20
300W liquid 300 210 100 1.6 - 4.8 7 - 20 50 0.7 2.5 3.5
400W liquid 400 280 100 1.6 - 4.8 7 - 20 50 0.7 2.5 3.5
500W liquid 500 350 100 1.6 - 6.4 8 - 22 50 0.7 2.5 3.5
Tab. 4 Product-specific torch data (EN 60 974-7)