4 Scope of Delivery 2000 advanced/2000
1 Coolant filling inlet 2 Coolant circulation outlet (blue) 3 Coolant circulation inlet (red)
4 Coolant discharging outlet neck 5 Level indicator 6 On/off switch
5 Flow monitor connector 8 Fuse 9
∅
6 Compressed air connector
Figure 6
Components of the 2000 coolant recirculator
NOTICE
• To permanently monitor the correct functioning of the entire cooling system, we recommend that you connect
the communication connector/flow monitor connector (7) to the control device.
Figure 7/8 Overview of the coolant circulation loop on page EN-11
• If the flow rate of the cooling unit (2000 advanced) is lower or higher than the set value, an alarm signal will be
given, and the cooling unit will choose whether to stop according to the settings (See Table 11 on page EN-27
for parameter settings).
EN-10
Water Filling
