Abicor Binzel ABI-CAR E-1200, Operating Instruction

Page: 54 / 68

EN - 22
BAL.0647.0 • 2018-08-24
7 Operation ABI-CAR E-1200 / E-1200-O
1 Pendulum delay time knob
(right/left/center)
2 Pendulum speed knob
3 Pendulum angle knob
4 Speed knob
5 START/STOP switch
6 Direction of motion switch
(left/center/right)
7 Welding torch reference point
knob
8 Welding mode selection switch
Fig. 16 ABI-CAR E-1200-O control elements
Pos. Designation Function
(1) Pendulum delay time
knob
Select by turning the knob for selecting the desired pendulum delay time in the
corresponding position. Press the knob to change the setting for the
corresponding position:
• L = left
• R = right
• C = center
(2) Pendulum speed knob Select by turning the knob for selection of the desired pendulum speed.
(3) Pendulum angle knob Select by turning the knob for selecting the desired angle at which the pendulum
moves.
(4) Speed knob Select by turning the knob for selection of the desired speed of the welding
tractor. The selected speed appears in the display above the knob.
• Turn to the right = increase speed
• Turn to the left = decrease speed
(5) START/STOP switch Select by switching to the corresponding start/stop position for the welding
tractor and welding process.
(6) Direction of motion left/
center/right
switch
Selection of desired direction of motion of welding tractor
• Left = move left
• Center = welding tractor stands still
• Right = move right
(7) Welding torch reference
point
knob
Select by turning the knob for setting the reference point for the welding torch.
(8) Welding mode selection
switch
Selection of desired welding function
• Up = end crater filler function (touch function)
• Center = no welding
• Down = welding
1 2 4
5 6
7
8
3