abi Classic Spreader 25 Owner'S Manual Download Page 4

 

Safety Precautions 

 

Please exercise caution at all times when setting up, operation, or performing 
maintenance on the ABI Classic Spreader. Remember, any piece of equipment like the 
ABI Classic Spreader can cause injury/damage if operated improperly, or if the user does 
not understand how to operate the equipment. Exercise caution at all times with using 
the ABI Classic Spreader.

 

 

● Never permit any person to ride or board the ABI Classic Spreader at any time. 

NEVER 

ALLOW RIDERS ON THE ABI CLASSIC SPREADER! 

● Ensure the implement is properly mounted, adjusted and in good operating condition. 
● Be sure the tractor is in neutral before starting the engine. 
● Use care and maintain minimum ground speed when operating the ABI Classic Spreader 

on a hillside or when operating close to ditches, fences, or water sources. 

● Personal protection equipment including safety glasses, safety shoes, and gloves are 

recommended during assembly, installation, operation, adjustment, maintaining and/or 
repairing the implement. 

● Be sure that no one is near the machine prior to engaging or while the machine is 

working. 

● Operate the ABI Classic Spreader in the daylight or under good artificial light. Operator 

should always be able to clearly see where they are going. 

● Be alert for hidden hazards. Always operate the ABI Classic Spreader with caution over 

work environments that may have buried obstacles. 

● Stay clear of all moving parts. Keep all limbs clear of attachments when making 

adjustments with all hydraulically operated attachments. 

● Use caution when operating the ABI Classic Spreader in icy, wet, or snowy conditions. 
● Do not use the ABI Classic Spreader on highways or public thoroughfares. The ABI 

Classic Spreader is designed for off road use only. 

● Operate the implement only with a tractor equipped with an approved 

Roll-Over-Protective-System (ROPS). Always wear your seatbelt. Serious injury or even 
death could result from falling off the tractor. 

● Always follow your tractor manufacturer’s rules for safe operation of the tractor and for 

proper procedures for attaching and disconnecting attachments. Contact your local 
tractor dealership for an owner’s manual for any questions related to the safe operation 
of the tractor. 

● The use of this equipment is subject to certain hazards which cannot be prevented by 

mechanical means or product design. All operators of this equipment must read and 
understand this manual, paying particular attention to safety and operating instructions, 
prior to using. 

● Do not operate the tractor/ATV and implement when you are tired, sick, or when using 

medication. 

©  Copyright 2017 ABI Attachments, Inc. 

Summary of Contents for Classic Spreader 25






























Reviews: