abi Classic Spreader 25, Owner'S Manual, Page: 18 / 29

Maintenance
Each area where the arrows point indicates where a grease point is located. Stickers on the
spreader body further indicate where grease/lubrication points are located.
● The spreader should be greased using a grease gun every 25-30 loads and before
storage. Make sure to grease all available grease areas before any period of storage.
● When greasing the hubs for the spreader, use caution to not over grease the hubs. Each
hub requires 2-3 full pumps of grease from a manual grease gun every 30-35 loads.
Hubs may need to be cleaned out once a year to remove old grease build up. All other
grease points should be greased until the grease oozes out of the bearing to help flush
out debris.
© Copyright 2017 ABI Attachments, Inc.
18