ABI Classic Spreader Setup Guide
12
ABI(
Absolute Innovations, Inc.
) - 855-211-0598 - www.abiattachments.com
Maintenance:
Grease/Lubrication Points:
x
Each area where the arrows point indicates where a grease/Lubrication point is located. Stickers on the
Spreader body further indicate where grease/lubrication points are located.
x
The spreader should be greased using a grease gun every 25-30 loads and before storage. Make sure to grease all
available grease areas before any period of storage. Use caution to not over grease fittings as it may damage the
bearings.
x
When greasing the hubs for the ABI Classic Ground Drive Spreader use caution to make sure you do not over grease
the hubs. You will want to put about 2-3 full pumps of grease into each hub using a manual grease gun every 30-35
loads. Hubs may need to be cleaned out once a year to remove old grease build up.
