ABI Classic Spreader Setup Guide
13
ABI(
Absolute Innovations, Inc.
) - 855-211-0598 - www.abiattachments.com
x
Every 30 -50 loads you may want to clean off the paws on the sprockets located on the right side of the spreader from
the back of your ABI Spreader. Grease from the hub may gather on the paws and will need to be cleaned to prevent
damage to the paws.
x
Clean chains after every use and oil chains after every 25-30 loads, or before and periods of storage. Oiling the chains
before periods of storage will help prevent rusting of the chains. For oiling the chains you can use SAE 30 or higher
rated oil for all the chains. It is not recommended to pour oil directly into the bed when oiling the apron chain. To oil
the apron chain you may want to use a cloth with oil on it to apply oil to the apron and drive chains.
x
Make sure to check all nuts and bolts to ensure they are tight after every 25-30 loads. If any nuts or bolts are found to
be loose, be sure to tighten them properly before use.
