Regularly clean with mild
liquid detergent or soap
and water
DO NOT use cream
cleaners or bleach.
These substances are
abrasive
DO NOT use cleaning
pads with abrasive
surfaces as this may
scratch the material
INSTALLATION GUIDE
Note:
This product must be installed by a licensed plumber. This is a general installation guide - there are many factors involved that
can alter the installation method.
AU/NZ:
For installations within Australia and New Zealand, this product must be installed in
compliance with AS/NZS 3500.
UK:
For installations in the United Kingdom this product must be installed in compliance with the
Water Supply (Water Fittings) Regulations and Water Supply (Water Fittings) (Scotland) Byelaws.
Other:
For installations outside
these countries, this product must be installed in compliance with the standards in your respective country.
1
I
N
T
E
R
I
O
R
S
2
Connect the power chord from the solenoid to the AC adapter.
AC adapter installation
Connect the battery pack to the AC adapter.
(If there is a loss of
power from the wall outlet the adapter will automatically switch to
battery power).
3
Connect the AC adapter to the wall outlet and power on.
Test and commission.
1.
2.
SOLENOID
BATTERY PACK
