manualshive.com logo in svg

ABI Attachments TR3-E Series, Owner'S Manual

Share
Download
ABI Attachments TR3-E Series Owner'S Manual Download Page 25

Call Toll Free: 

877-788-7253

Email: 

[email protected]

25

Toplink - 

Be sure to keep the threaded parts of toplinks greased so they don’t seize over time.

 

Finish Rake -

 Occasionally over the life the tool, bent finger(s) on the finish rake may appear. If this occurs, place a pipe over the 

bent finger and use the pipe as leverage to straighten the finger back out. 

Grooming Rods -

 If one of the grooming rods appears to be bent, use a vice and hammer to bend it back straight. 

Finish –

 To prevent rust from developing on a surface due to scratches on the tool, use a rust stopping primer and semi-gloss 

black paint to refinish the damaged area. 

Wheels and Hubs -

 The bearings in the hubs on the TR3-E should be greased every 3 months. They should also be greased before 

any long period of storage. (see 

Figure 13

)

Maintenance

Location of Grease 

Fitting on Wheel 

Hub Assembly

Figure 13.

Summary of Contents for TR3-E Series









































Reviews:

No comments

Brands by name

Popular brands

Load more brands